Just come back from a trip to Home Depot. I used the truck hire, which was easy. Now I also have 3 sheets of 4’x8′ 3/4″ oak ply in my basement, and I picked up a few 2″x3″x8′ studs too for cutting supports.
Related Posts
Building a MAME cabinet 5
Another stop at Home Depot this morning. DeWalt countersink bits Mallet (for knocking in the t-molding) Gloves Masking tape (for anti-splinter on the top side of ply cuts, and for painting) 4 x 2-1/2″ hinges (two for the top, two for the front) I’m now at the point where I…
Building a MAME cabinet 10
Today I did some more work on the cabinet. Little by little, it’s progressing. I figure the trick is just to keep at it. So I tackled the somewhat daunting task of routing a 3/4″ groove at the base of the sides to slot the cabinet base into. I had…
Building a MAME cabinet
I’ve been wanting to build one for years and now I am starting the project. So I have been reading all about it online, of course, and now I have a shopping list of parts and an idea of how to proceed. An hour or so’s fiddling produced this plan:…